RomoCoat PhosGuard RP Blue
Light Phosphating Rust Preventive Pretreatment Coating

Description

• Single-pack system; ready to use, no mixing.
• Light phosphating action forming a thin phosphate layer at 5–10 microns DFT.
• Air-drying with option to stove at low temperature (100 °C for 5 minutes).
• Provides excellent mechanical key and adhesion for alkyd, polyester, epoxy and polyurethane topcoats.
• Under-film corrosion resistance; reduces spread of rust from damaged topcoat areas.
• Very low film build, ideal for precision parts and complex geometries.
• Supplied at application viscosity; no thinner required in normal conditions.
• Blue - colour helps visual confirmation of uniform coverage.

Application Area

Practical areas of application (without overcoating on your line)

• Storage protection for fabricated steel parts: press parts, brackets, frames, structures that may sit in your or customer’s warehouse for weeks/months before final painting elsewhere.
• In process protection for job work / machining shops: supply machined or fabricated components to OEMs with a rust free, “paint ready” thin film instead of sending them bare.
• Drums, barrels and engineering components: internal factory or customer inventory where only temporary rust protection is required and final user will later blast/prime/topcoat by their own system.
• Spare parts and maintenance stocks: bolts, brackets, supports, small steel items stored in stores/yard where only clean, non flaky, rust free condition is needed, not a decorative topcoat.
• Export packing and long distance transport: coat parts before packing so that during sea/road transit they arrive rust free, and buyer will later remove/lightly clean and paint with their preferred system

---

Download PDS

RomoCoat ZINC RICH EPOXY PRIMER-1265

RomaCoat Zinc Rich Epoxy Primer 1265 is a two pack metallic zinc rich epoxy primer designed as a high performance first coat for aggressive, highly corrosive environments.

What this primer is

• Two component epoxy primer with metallic zinc dust as the main pigment, giving strong cathodic (sacrificial) protection to steel.
• Used as the first coat in heavy duty anti corrosive systems for new construction and maintenance.

Where it is typically used

• Offshore and marine: jackets, platforms, jetties, splash zone steel and coastal structures.
• Petrochemical and oil & gas: process structures, pipe racks, tank externals, refineries and terminals.
• Bridges and infrastructure: highway and railway bridges, flyovers and exposed structural steel.
• Power plants and heavy industry: boiler structures, chimneys, conveyors, cranes and general plant steelwork.

---

Download PDS

RomoCoat Epoxy Finish Paint

RomoCoat Epoxy Finish Paint is a two component, general purpose epoxy topcoat for steel in land and marine atmospheres, with good resistance to water and mild chemicals but a tendency to chalk under UV/weathering (so best under a PU or for interiors/semi sheltered areas).

Description

Designed as an epoxy finishing coat for structural steel and equipment exposed to atmospheric, marine and general industrial conditions, where chemical and water resistance are important.

Typical applications

1. Structural steel & industrial plants
2. Marine and coastal atmospheres (non decorative or under PU)
3. Tanks, process equipment and piping (externals & internals where suitable)
4. Floors, concrete & secondary containment (light/medium duty)
5. OEM & maintenance coating

---

Download PDS

RomoCoat Aluminium Paint – Dual Container

RomoCoat Aluminium Paint Dual Container is a two pack, air drying aluminium finish (aluminium paste + medium packed separately) that gives a bright, lustrous, corrosion resistant coating for exterior and interior steel.

Description

• Dual pack system where aluminium paste and medium are supplied separately and mixed immediately before application to maximize metallic lustre and leafing effect.
• Forms a durable, flexible, lustrous aluminium film with good corrosion resistance, Mild heat resistance, hardness and adhesion on properly primed or prepared steel.

Typical applications

Primary Uses

• Structural steel: roof trusses, columns, gantries, platform steel, sheds and general structural steelwork in industrial and coastal atmospheres.
• Electrical transmission towers and poles: lattice towers, lighting poles, sub station structures and line hardware where a reflective, weather resistant finish is desired over primers or galvanizing.
• Storage tanks: external surfaces of oil, fuel, petrochemical and water tanks; aluminium film reflects heat and reduces temperature rise of tank shell.

Other suitable areas

• Bridges and infrastructure: railway/road bridges, walkways, guardrails and lamp posts for long term metallic protection.
• Industrial equipment & fabrications: air coolers, ducts, chimneys, stacks, silos, conveyors, metal roofs, grills, gates and machinery housings.

Galvanised and previously painted steel (with suitable primer/roughening) where a decorative metallic look plus extra protection is required.

---

Download PDS

RomoCoat 1860 FAST DRYING ANTI-CORROSIVE ALKYD PAINT

Description

Rosalee Fast Drying Paint is a single pack, solvent borne, quick air drying QD alkyd topcoat containing anti corrosive zinc chromate pigments. It is designed as a general purpose industrial enamel for protecting and decorating metal surfaces exposed to normal industrial atmospheric conditions.

Typical applications

General purpose anti corrosive finish for:

• Structural and fabrication steel: beams, channels, angles, platforms, ladders, handrails and general plant steel in mild to moderately corrosive atmospheres.
• Machinery and equipment: shop fabricated machines, small process equipment, guards, supports, frames, racks, trolleys and handling equipment.
• Storage & utility items: cabinets, lockers, gates, fencing, poles, scaffolding and general indoor/outdoor metalwork.
• Automotive/agri/ancillary fabrications: trailers, agricultural implements, small vehicle bodies and accessories where quick turnaround and low cost protection are required.
• As a single or finishing coat over compatible primers (e.g. synthetic red oxide / zinc chromate) in workshops and job coaters needing fast handling and recoating.

---

Download PDS

RomoCoat 1257 Surface Tolerant Epoxy Paint

RomoCoat 1257 Surface Tolerant Epoxy Paint is a two component, high solids, surface tolerant epoxy mastic/primer for heavy duty protection of steel in marine and industrial environments, especially where surface preparation is limited.

Description

• Two pack, high build polyamide adduct cured epoxy with very high volume solids (~80%), giving low VOC and thick films in one or two coats.
• Very hard, tough yet flexibilised film with excellent wetting of marginally prepared steel; cures at relatively low temperatures and acts as a surface tolerant epoxy primer or self priming coat.

Typical applications

1. Marine & offshore (immersion and splash zone)
2. Coastal & industrial structural steel
3. Heavy duty maintenance coating (surface tolerant)
4. New steel & low VOC high build systems

---

Download PDS

RomoCoat 1256 HB Mastic Epoxy Paint

RomoCoat 1256 HB Mastic Epoxy is a fast drying, high solids, surface tolerant epoxy mastic for heavy duty protection of steel and concrete in aggressive industrial and marine environments.

Description

• Two component, high build, polyamide adduct cured epoxy mastic with very high volume solids (~80%) and excellent wetting properties.
• Forms a very hard, tough yet flexibilised coating that cures even at relatively low temperatures and tolerates marginally prepared substrates (within limits).
• Can act as self priming coat, intermediate, or finish coat in low VOC, high build heavy duty systems.

Typical applications

1. Marine & offshore (ballast tanks, underwater hull, splash zone)
2. Industrial & coastal structural steel
3. Heavy duty maintenance coating (surface tolerant)
4. Immersion & water/waste water service (where specified)
5. New build steel where low VOC + high build are needed

---

Download PDS

RomoCoat Two Pack Etch Primer

RomoCoat Two Pack Etch Primer is a two component, self etching primer that chemically bites into metal and gives excellent adhesion on galvanised iron, aluminium and other non ferrous metals, and also improves adhesion/corrosion resistance on steel.

Description

• Two pack air drying etch / wash primer based on special resins and acidic components, designed to etch the metal surface and create a thin, tightly adherent conversion layer.
• Provides strong adhesion for subsequent primers and topcoats, especially on difficult metals where normal primers tend to peel or flake (GI, aluminium, light alloys, pre coated sheets).

Typical applications

Adhesion promotion on non ferrous metals

• Galvanised iron sheets, purlins, guard rails, cable trays, ducts, roofing sheets and metal sprayed steel where adhesion is normally poor.
• Aluminium: panels, doors/windows, cladding, tanks, housings, light alloys and extrusions.
• Other non ferrous: zinc, copper, brass and tin components where a thin etching primer is required before main primer/topcoat.

Adhesion promotion on non ferrous metals

• Bare steel or thin sheet metal that cannot easily be blast cleaned; etch primer plus hand/power tool abrasion gives enough key for subsequent primers/finishes.
• As a first coat in high humidity/monsoon conditions to reduce flash rust and improve adhesion of full paint systems.

---

Download PDS

RomoCoat HB Coal Tar Epoxy 7260

RomoCoat HB Coal Tar Epoxy 7260 is a two component, polyamide cured, high build coal tar epoxy for long term protection of steel and concrete in immersed and very wet, chemically aggressive environments.

Description

• Two pack coal tar–epoxy coating combining epoxy resin with coal tar to give excellent adhesion, abrasion resistance, water impermeability and resistance to dilute acids, alkalis and many industrial chemicals.
• Designed as a high build barrier coat for submerged, underground and splash zone exposure on steel (and suitably prepared concrete) where long term service is required.

Typical applications

1) Hydropower & water infrastructure

• Hydro electric units: penstocks, draft tubes, spiral casings, water passages and gates carrying raw water to turbines.
• Dam and canal structures: steel liners, sluice gates, guide vanes and steel parts permanently or intermittently immersed in fresh water.

2) Marine & harbour installations

• Harbour and jetty steel: piles, dolphins, fenders, sheet piles, quay structures and submerged/ splash zone steel exposed to sea water, tidal action and abrasion.
• Underwater hull exterior (in conjunction with cathodic protection): outer hull below waterline, bilge areas and other immersed steel, where coal tar epoxy provides an excellent acid/alkali and water barrier under CP systems.

3) Cooling towers & water treatment

• Cooling tower basins, channels, inside/outside of riser pipes and structural members exposed to continuous wetting and mildly aggressive circulating water.
• Water and effluent treatment facilities: clarifier bridges, tanks, contact chambers, sewage and effluent lines where resistance to sewage, salt, dilute acids/alkalis and microorganisms is required.

4) Underground & buried structures

• Underground pipelines, external surfaces of buried steel, foundations, piles and other below ground steel/concrete exposed to moist, acidic or alkaline soils.
• Crude oil and fuel storage tanks (external below grade portions or internal where coal tar is allowed by spec) and bund walls subject to chemical and water attack.

---

Download PDS

RomoCoat HEAT & OIL RESISTING PAINT

Description

RomoCoat Heat & Oil Resisting Paint is a single-pack, air-drying topcoat based on a combination of specialty polymers, specially formulated to withstand continuous exposure to transformer oil up to 120°C.
The coating provides excellent resistance to hot mineral oil, good heat stability, and reliable protection for internal transformer components.

Typical applications

This coating is designed for oil-immersed electrical equipment where resistance to hot transformer oil and moderate heat is essential.

Electrical & Transformer Applications

• Internal surfaces of M.S. transformer tanks
• Transformer radiators (internal side)
• Conservator tanks (internal surfaces)
• Transformer covers and structural components exposed to oil vapors
• Distribution and power transformers
• Oil-filled reactors and choke coils

Industrial Oil Exposure Areas

• Oil sumps and oil collection trays (moderate temperature)
• Oil circulation chambers
• Equipment housings exposed to hot lubricating or insulating oils

General Engineering Applications

• Mild steel components exposed to hot mineral oils, transformer oil fumes, elevated operating temperatures, electrical panels and enclosures (internal areas near oil-filled systems)

---

Download PDS

RomoCoat EHB Epoxy High Build Zinc Phosphate Primer

RomoCoat EHB is a two component, polyamide cured, high build epoxy anti corrosive primer pigmented with zinc phosphate for structural steel and suitably prepared non ferrous substrates.

Description

• Two pack epoxy primer with high volume solids and zinc phosphate anticorrosive pigment.
• Designed for aggressive and industrial atmospheres where resistance to water, moisture, mild chemicals, sultry coastal conditions and abrasion is required, and can be used as a primer in tank lining systems.

Typical applications

• Structural steel and fabrication: beams, columns, platforms, pipe racks and general plant steelwork in coastal/industrial environments.
• Refineries, petrochemical and chemical plants: process structures, tank externals, pipe racks and loading bays.
• Power plants and utilities: boiler structures, ESPs, chimneys, conveyors and cable tray supports.
• Marine/coastal on shore steel: jetties, cranes, yard structures and port equipment above splash zone.
• Tank lining systems: as primer on blasted steel for compatible epoxy tank linings for water, fuels and many chemicals (subject to lining TDS).
• Non ferrous/other: suitably roughened aluminium, galvanized steel and some concrete surfaces where an epoxy primer is specified.

---

Download PDS

RomoCoat 34 PU Polyurethane Paint

RomoCoat 34 PU Polyurethane Pain is a two component acrylic aliphatic polyurethane finish with high gloss, very good colour retention and strong resistance to water, chemicals, impact, abrasion and industrial corrosive atmospheres.
Designed as a high gloss, light fast, weather resistant finish coat over suitable primers/intermediates on demanding industrial and OEM structures.

Typical applications

• Finish coat on steel, aluminium, GRP (glass fibre reinforced polyester) and plywood where long term gloss and colour retention are required.
• Ideal for exterior structural steel, machinery, tank exteriors, fabricated components, transport equipment and coastal/industrial atmospheres when applied over epoxy primers/intercoats.

---

Download PDS

RomoCoat FUNGIGUARD ESW 100 Paint
Anti-Fungal Egg Shell White Stoving Finish

RomaCoat FUNGIGUARD ESW 100 is a single-pack, air-drying and stoving type, oleo-resinous alkyd-based anti-fungal protective coating. It is specially formulated to provide excellent resistance against corrosion, fungal growth, humidity, fresh water, and oil vapours.
The coating forms a smooth egg-shell white finish, making it ideal for applications where clean appearance, hygiene, and durability are essential.

Typical applications

• Finishing coat for steel and stainless steel substrates
• Underbody coating of kitchen sinks
• Commercial kitchen equipment
• HoReCa installations
• Food processing equipment (external / non-food contact areas)
• General-purpose industrial applications exposed to humid and oily environments

Key Properties

• Anti-fungal protection
• Good corrosion resistance
• Smooth egg-shell finish
• Good adhesion on metal surfaces
• Suitable for humid and kitchen environments
• Can be air dried or stove cured

---

Download PDS

RomoCoat EPOXY MIO PAINT 1765

RomoCoat Epoxy MIO Paint is a fast-drying, high-build, two-pack epoxy intermediate coat pigmented with micaceous iron oxide (MIO) for tough anti-corrosive systems.

Short technical description

• Two-component epoxy (mixing ratio 4:1 by volume) with MIO for barrier protection and abrasion resistance.
• Designed as an intermediate coat in multicoat systems where high resistance to moisture, water, mild chemicals and saline/sultry conditions is needed (marine, coastal, industrial).

Typical applications / where to use

• As an intermediate coat over epoxy primers and under epoxy/PU topcoats in: structural steel, tanks externals, pipe racks, offshore/onshore structures, marine/coastal steel, power plants and chemical plants.
• Situations needing high moisture, water, saline and mild chemical resistance plus abrasion resistance (jetties, bridges, industrial sheds, process structures).

---

Download PDS

RomoCoat 1255 – Zinc Phosphate Flow Primer
Radiator DIP Coating (Immersion Coating)

RomoCoat 1255 is a high-performance zinc phosphate–based flow primer specially developed for radiator dip (immersion) coating applications. It provides superior corrosion protection and long-term durability to radiator components.
The primer actively inhibits rust formation on steel and metal substrates by forming a protective zinc phosphate layer, which acts as a strong and stable base for subsequent topcoats.
A key speciality of RomoCoat 1255 is its bubble-free flow coating performance, ensuring smooth, uniform films even in immersion applications.
RomoCoat 1255 is a two-component, phenalkamine-cured, air-drying primer, pigmented with zinc phosphate, suitable for both industrial and heavy-duty protective coating systems.

• Excellent anti-corrosive protection
• Bubble-free, smooth flow coating
• Durable and uniform coating film
• Superior adhesion to metal surfaces
• Good water and moisture resistance
• Fast drying, enabling efficient production cycles
• Compatible with epoxy and alkyd-based topcoats

Ideal for flow and dip coating processes
It is ideally suited for Radiator DIP (Immersion) Coating, where bundles of radiator fins—typically made of steel or aluminum—are immersed into a coating tank containing the primer.

This process ensures:

• Complete coverage, including hard-to-reach areas
• Uniform and consistent film thickness
• Enhanced corrosion protection of the entire assembly

---

Download PDS